Lua Reference Manual of the Programming Language Lua 4.0

by Roberto Ierusalimschy, Luiz Henrique de Figueiredo, Waldemar Celes

Copyright © 1994-2000 Tecgraf, PUC-Rio. All rights reserved.


1 - Introduction

Lua is an extension programming language designed to support general procedural programming with data description facilities. Lua is intended to be used as a powerful, light-weight configuration language for any program that needs one.

Lua is implemented as a library, written in C. Being an extension language, Lua has no notion of a ``main'' program: it only works embedded in a host client, called the embedding program. This host program can invoke functions to execute a piece of code in Lua, can write and read Lua variables, and can register C functions to be called by Lua code. Through the use of C functions, Lua can be augmented to cope with a wide range of different domains, thus creating customized programming languages sharing a syntactical framework.

Lua is free-distribution software, and is provided as usual with no guarantees, as stated in its copyright notice. The implementation described in this manual is available at the following URL's:

       http://www.tecgraf.puc-rio.br/lua/
       ftp://ftp.tecgraf.puc-rio.br/pub/lua/

Like any other reference manual, this document is dry in places. For a discussion of the decisions behind the design of Lua, see the papers below, which are available at the web site above.


2 - Environment and Chunks

All statements in Lua are executed in a global environment. This environment is initialized with a call from the embedding program to lua_open and persists until a call to lua_close, or the end of the embedding program. If necessary, the host programmer can create multiple independent global environments, and freely switch between them (see Section 5.1).

The global environment can be manipulated by Lua code or by the embedding program, which can read and write global variables using API functions from the library that implements Lua.

Global variables in Lua do not need to be declared. Any variable is assumed to be global unless explicitly declared local (see Section 4.4.6). Before the first assignment, the value of a global variable is nil (this default can be changed; see Section 4.8). A table is used to keep all global names and values (tables are explained in Section 3).

The unit of execution of Lua is called a chunk. A chunk is simply a sequence of statements, which are executed sequentially. Each statement can be optionally followed by a semicolon:

       chunk ::= {stat [`;']}
Statements are described in Section 4.4. (The notation above is the usual extended BNF, in which {a} means 0 or more a's, [a] means an optional a, and (a)+ means one or more a's. The complete syntax of Lua is given in BNF).

A chunk may be stored in a file or in a string inside the host program. When a chunk is executed, first it is pre-compiled into bytecodes for a virtual machine, and then the statements are executed in sequential order, by simulating the virtual machine. All modifications a chunk effects on the global environment persist after the chunk ends.

Chunks may also be pre-compiled into binary form and stored in files; see program luac for details. Text files with chunks and their binary pre-compiled forms are interchangeable. Lua automatically detects the file type and acts accordingly.


3 - Types and Tags

Lua is a dynamically typed language. This means that variables do not have types; only values do. Therefore, there are no type definitions in the language. All values carry their own type. Besides a type, all values also have a tag.

There are six basic types in Lua: nil, number, string, function, userdata, and table. Nil is the type of the value nil, whose main property is to be different from any other value. Number represents real (double-precision floating-point) numbers, while string has the usual meaning. Lua is 8-bit clean, and so strings may contain any 8-bit character, including embedded zeros ('\0') (see Section 4.1). The type function returns a string describing the type of a given value (see Section 6.1).

Functions are considered first-class values in Lua. This means that functions can be stored in variables, passed as arguments to other functions, and returned as results. Lua can call (and manipulate) functions written in Lua and functions written in C. The two kinds of functions can be distinguished by their tags: all Lua functions have the same tag, and all C functions have the same tag, which is different from the tag of Lua functions. The tag function returns the tag of a given value (see Section 6.1).

The type userdata is provided to allow arbitrary C pointers to be stored in Lua variables. This type corresponds to a void* and has no pre-defined operations in Lua, except assignment and equality test. However, by using tag methods, the programmer can define operations for userdata values (see Section 4.8).

The type table implements associative arrays, that is, arrays that can be indexed not only with numbers, but with any value (except nil). Therefore, this type may be used not only to represent ordinary arrays, but also symbol tables, sets, records, graphs, trees, etc. Tables are the main data structuring mechanism in Lua. To represent records, Lua uses the field name as an index. The language supports this representation by providing a.name as syntactic sugar for a["name"]. Tables may also carry methods: Because functions are first class values, table fields may contain functions. The form t:f(x) is syntactic sugar for t.f(t,x), which calls the method f from the table t passing the table itself as the first parameter (see Section 4.5.9).

Note that tables are objects, and not values. Variables do not contain tables, only references to them. Assignment, parameter passing, and returns always manipulate references to tables, and do not imply any kind of copy. Moreover, tables must be explicitly created before used (see Section 4.5.7).

Each of the types nil, number, and string has a different tag. All values of each of these types have the same pre-defined tag. As explained above, values of type function can have two different tags, depending on whether they are Lua functions or C functions. Finally, values of type userdata and table can have variable tags, assigned by the programmer (see Section 4.8). The tag function returns the tag of a given value. User tags are created with the function newtag. The settag function is used to change the tag of a table (see Section 6.1). The tag of userdata values can only be set from C (see Section 5.7). Tags are mainly used to select tag methods when some events occur. Tag methods are the main mechanism for extending the semantics of Lua (see Section 4.8).


4 - The Language

This section describes the lexis, the syntax, and the semantics of Lua.

4.1 - Lexical Conventions

Identifiers in Lua can be any string of letters, digits, and underscores, not beginning with a digit. This coincides with the definition of identifiers in most languages, except that the definition of letter depends on the current locale: Any character considered alphabetic by the current locale can be used in an identifier. The following words are reserved, and cannot be used as identifiers:

       and       break     do        else      elseif
       end       for       function  if        in
       local     nil       not       or        repeat
       return    then      until     while

Lua is a case-sensitive language: and is a reserved word, but And and ánd (if the locale permits) are two different, valid identifiers. As a convention, identifiers starting with underscore followed by uppercase letters (such as _INPUT) are reserved for internal variables.

The following strings denote other tokens:

       ~=    <=    >=    <     >     ==    =     +     -     *     /     
       (     )     {     }     [     ]     ;     ,     .     ..    ...

Literal strings can be delimited by matching single or double quotes, and can contain the C-like escape sequences `\a' (bell), `\b' (backspace), `\f' (form feed), `\n' (newline), `\r' (carriage return), `\t' (horizontal tab), `\v' (vertical tab), `\\' (backslash), `\"' (double quote), `\'' (single quote), and `\newline' (that is, a backslash followed by a real newline, which results in a newline in the string). A character in a string may also be specified by its numerical value, through the escape sequence `\ddd', where ddd is a sequence of up to three decimal digits. Strings in Lua may contain any 8-bit value, including embedded zeros, which can be specified as `\000'.

Literal strings can also be delimited by matching [[ ... ]]. Literals in this bracketed form may run for several lines, may contain nested [[ ... ]] pairs, and do not interpret escape sequences. This form is specially convenient for writing strings that contain program pieces or other quoted strings. As an example, in a system using ASCII, the following three literals are equivalent:

       1)   "alo\n123\""
       2)   '\97lo\10\04923"'
       3)   [[alo
            123"]]

Comments start anywhere outside a string with a double hyphen (--) and run until the end of the line. Moreover, the first line of a chunk is skipped if it starts with #. This facility allows the use of Lua as a script interpreter in Unix systems (see Section 8).

Numerical constants may be written with an optional decimal part and an optional decimal exponent. Examples of valid numerical constants are

       3     3.0     3.1416  314.16e-2   0.31416E1

4.2 - Coercion

Lua provides some automatic conversions between values at run time. Any arithmetic operation applied to a string tries to convert that string to a number, following the usual rules. Conversely, whenever a number is used when a string is expected, that number is converted to a string, in a reasonable format. The format is chosen so that a conversion from number to string then back to number reproduces the original number exactly. Thus, the conversion does not necessarily produces nice-looking text for some numbers. For complete control of how numbers are converted to strings, use the format function (see Section 6.2).

4.3 - Adjustment

Functions in Lua can return many values. Because there are no type declarations, when a function is called the system does not know how many values the function will return, or how many parameters it needs. Therefore, sometimes, a list of values must be adjusted, at run time, to a given length. If there are more values than are needed, then the excess values are thrown away. If there are less values than are needed, then the list is extended with as many nil's as needed. This adjustment occurs in multiple assignments (see Section 4.4.2) and in function calls (see Section 4.5.8).

4.4 - Statements

Lua supports an almost conventional set of statements, similar to those in Pascal or C. The conventional commands include assignment, control structures, and procedure calls. Non-conventional commands include table constructors (see Section 4.5.7) and local variable declarations (see Section 4.4.6).

4.4.1 - Blocks

A block is a list of statements; syntactically, a block is equal to a chunk:
       block ::= chunk

A block may be explicitly delimited:

       stat ::= do block end
Explicit blocks are useful to control the scope of local variables (see Section 4.4.6). Explicit blocks are also sometimes used to add a return or break statement in the middle of another block (see Section 4.4.3).

4.4.2 - Assignment

Lua allows multiple assignment. Therefore, the syntax for assignment defines a list of variables on the left side and a list of expressions on the right side. The elements in both lists are separated by commas:
       stat ::= varlist1 `=' explist1
       varlist1 ::= var {`,' var}
This statement first evaluates all values on the right side and eventual indices on the left side, and then makes the assignments. So, the code
       i = 3
       i, a[i] = 4, 20
sets a[3] to 20, but does not affect a[4] because the i in a[i] is evaluated before it is assigned 4.

Multiple assignment can be used to exchange two values, as in

       x, y = y, x

The two lists in a multiple assignment may have different lengths. Before the assignment, the list of values is adjusted to the length of the list of variables (see Section 4.3).

A single name can denote a global variable, a local variable, or a formal parameter:

       var ::= name

Square brackets are used to index a table:

       var ::= varorfunc `[' exp1 `]'
       varorfunc ::= var | functioncall
The varorfunc should result in a table value, from where the field indexed by the expression exp1 value gets the assigned value.

The syntax var.NAME is just syntactic sugar for var["NAME"]:

       var ::= varorfunc `.' name

The meaning of assignments and evaluations of global variables and indexed variables can be changed by tag methods (see Section 4.8). Actually, an assignment x = val, where x is a global variable, is equivalent to a call setglobal("x", val) and an assignment t[i] = val is equivalent to settable_event(t,i,val). See Section 4.8 for a complete description of these functions (setglobal is in the basic library; settable_event is used for explanatory purposes only).

4.4.3 - Control Structures

The control structures if, while, and repeat have the usual meaning and familiar syntax
       stat ::= while exp1 do block end
       stat ::= repeat block until exp1
       stat ::= if exp1 then block {elseif exp1 then block} [else block] end
The condition expression exp1 of a control structure may return any value. All values different from nil are considered true; only nil is considered false.

The return statement is used to return values from a function or from a chunk. Because functions or chunks may return more than one value, the syntax for the return statement is

       stat ::= return [explist1]

The break statement can be used to terminate the execution of a loop, skipping to the next statement after the loop:

       stat ::= break
A break ends the innermost enclosing loop (while, repeat, or for).

For syntactic reasons, return and break statements can only be written as the last statements of a block. If it is really necessary to return or break in the middle of a block, an explicit inner block can used, as in the idiom `do return end', because now return is last statement in the inner block.

4.4.4 - For Statement

The for statement has two forms, one for numbers and one for tables. The numerical for loop has the following syntax:

       stat ::= for name `=' exp1 `,' exp1 [`,' exp1] do block end
A for statement like
       for var = e1 ,e2, e3 do block end
is equivalent to the code:
       do
         local var, _limit, _step = tonumber(e1), tonumber(e2), tonumber(e3)
         if not (var and _limit and _step) then error() end
         while (_step>0 and var<=_limit) or (_step<=0 and var>=_limit) do
           block
           var = var+_step
         end
       end
Note the following:

The table for statement traverses all pairs (index,value) of a given table. It has the following syntax:

       stat ::= for name `,' name in exp1 do block end
A for statement like
       for index, value in exp do block end
is equivalent to the code:
       do
         local _t = exp
         local index, value = next(t, nil)
         while index do
           block
           index, value = next(t, index)
         end
       end
Note the following:

4.4.5 - Function Calls as Statements

Because of possible side-effects, function calls can be executed as statements:
       stat ::= functioncall
In this case, all returned values are thrown away. Function calls are explained in Section 4.5.8.

4.4.6 - Local Declarations

Local variables may be declared anywhere inside a block. The declaration may include an initial assignment:
       stat ::= local declist [init]
       declist ::= name {`,' name}
       init ::= `=' explist1
If present, an initial assignment has the same semantics of a multiple assignment. Otherwise, all variables are initialized with nil.

A chunk is also a block, and so local variables can be declared outside any explicit block.

The scope of local variables begins after the declaration and lasts until the end of the block. Thus, the code local print=print creates a local variable called print whose initial value is that of the global variable of the same name.

4.5 - Expressions

4.5.1 - Basic Expressions

The basic expressions in Lua are
       exp ::= `(' exp `)'
       exp ::= nil
       exp ::= number
       exp ::= literal
       exp ::= var
       exp ::= upvalue
       exp ::= function
       exp ::= functioncall
       exp ::= tableconstructor

Numbers (numerical constants) and literal strings are explained in Section 4.1; variables are explained in Section 4.4.2; upvalues are explained in Section 4.6; function definitions are explained in Section 4.5.9; function calls are explained in Section 4.5.8. Table constructors are explained in Section 4.5.7.

An access to a global variable x is equivalent to a call getglobal("x") and an access to an indexed variable t[i] is equivalent to a call gettable_event(t,i). See Section 4.8 for a description of these functions (getglobal is in the basic library; gettable_event is used for explanatory purposes only).

The non-terminal exp1 is used to indicate that the values returned by an expression must be adjusted to one single value:

       exp1 ::= exp

4.5.2 - Arithmetic Operators

Lua supports the usual arithmetic operators: the binary + (addition), - (subtraction), * (multiplication), / (division), and ^ (exponentiation); and unary - (negation). If the operands are numbers, or strings that can be converted to numbers (according to the rules given in Section 4.2), then all operations except exponentiation have the usual meaning. Otherwise, an appropriate tag method is called (see Section 4.8). An exponentiation always calls a tag method. The standard mathematical library redefines this method for numbers, giving the expected meaning to exponentiation (see Section 6.3).

4.5.3 - Relational Operators

The relational operators in Lua are
       ==    ~=    <     >     <=    >=
These operators return nil as false and a value different from nil as true.

Equality (==) first compares the tags of its operands. If they are different, then the result is nil. Otherwise, their values are compared. Numbers and strings are compared in the usual way. Tables, userdata, and functions are compared by reference, that is, two tables are considered equal only if they are the same table. The operator ~= is exactly the negation of equality (==).

The conversion rules of Section 4.2 do not apply to equality comparisons. Thus, "0"==0 evaluates to false, and t[0] and t["0"] denote different entries in a table.

The order operators work as follows. If both arguments are numbers, then they are compared as such. Otherwise, if both arguments are strings, then their values are compared using lexicographical order. Otherwise, the ``lt'' tag method is called (see Section 4.8).

4.5.4 - Logical Operators

The logical operators in Lua are
       and   or    not
Like the control structures, all logical operators consider nil as false and anything else as true.

The conjunction operator and returns nil if its first argument is nil; otherwise, it returns its second argument. The disjunction operator or returns its first argument if it is different from nil; otherwise, it returns its second argument. Both and and or use short-cut evaluation, that is, the second operand is evaluated only if necessary.

There are two useful Lua idioms that use logical operators. The first idiom is

       x = x or v
which is equivalent to
       if x == nil then x = v end
This idiom sets x to a default value v when x is not set.

The second idiom is

       x = a and b or c
which should be read as x = (a and b) or c. This idiom is equivalent to
       if a then x = b else x = c end
provided that b is not nil.

4.5.5 - Concatenation

The string concatenation operator in Lua is denoted by two dots (`..'). If both operands are strings or numbers, then they are converted to strings according to the rules in Section 4.2. Otherwise, the ``concat'' tag method is called (see Section 4.8).

4.5.6 - Precedence

Operator precedence in Lua follows the table below, from the lower to the higher priority:
       and   or
       <     >     <=    >=    ~=    ==
       ..
       +     -
       *     /
       not   - (unary)
       ^
All binary operators are left associative, except for ^ (exponentiation), which is right associative. The pre-compiler may rearrange the order of evaluation of associative operators (such as .. or +), as long as these optimizations do not change normal results. However, these optimizations may change some results if you define non-associative tag methods for these operators.

4.5.7 - Table Constructors

Table constructors are expressions that create tables; every time a constructor is evaluated, a new table is created. Constructors can be used to create empty tables, or to create a table and initialize some of its fields. The general syntax for constructors is
       tableconstructor ::= `{' fieldlist `}'
       fieldlist ::= lfieldlist | ffieldlist | lfieldlist `;' ffieldlist | ffieldlist `;' lfieldlist
       lfieldlist ::= [lfieldlist1]
       ffieldlist ::= [ffieldlist1]

The form lfieldlist1 is used to initialize lists:

       lfieldlist1 ::= exp {`,' exp} [`,']
The expressions in the list are assigned to consecutive numerical indices, starting with 1. For example,
       a = {"v1", "v2", 34}
is equivalent to
       do
         local temp = {}
         temp[1] = "v1"
         temp[2] = "v2"
         temp[3] = 34
         a = temp
       end

The form ffieldlist1 initializes other fields in a table:

       ffieldlist1 ::= ffield {`,' ffield} [`,']
       ffield ::= `[' exp `]' `=' exp | name `=' exp
For example,
       a = {[f(k)] = g(y), x = 1, y = 3, [0] = b+c}
is equivalent to
       do
         local temp = {}
         temp[f(k)] = g(y)
         temp.x = 1    -- or temp["x"] = 1
         temp.y = 3    -- or temp["y"] = 3
         temp[0] = b+c
         a = temp
       end
An expression like {x = 1, y = 4} is in fact syntactic sugar for {["x"] = 1, ["y"] = 4}.

Both forms may have an optional trailing comma, and can be used in the same constructor separated by a semi-colon. For example, all forms below are correct.

       x = {;}
       x = {"a", "b",}
       x = {type="list"; "a", "b"}
       x = {f(0), f(1), f(2),; n=3,}

4.5.8 - Function Calls

A function call in Lua has the following syntax:
       functioncall ::= varorfunc args
First, varorfunc is evaluated. If its value has type function, then this function is called, with the given arguments. Otherwise, the ``function'' tag method is called, having as first parameter the value of varorfunc, and then the original call arguments (see Section 4.8).

The form

       functioncall ::= varorfunc `:' name args
can be used to call ``methods''. A call v:name(...) is syntactic sugar for v.name(v, ...), except that v is evaluated only once.

Arguments have the following syntax:

       args ::= `(' [explist1] `)'
       args ::= tableconstructor
       args ::= literal
       explist1 ::= {exp1 `,'} exp
All argument expressions are evaluated before the call. A call of the form f{...} is syntactic sugar for f({...}), that is, the argument list is a single new table. A call of the form f'...' (or f"..." or f[[...]]) is syntactic sugar for f('...'), that is, the argument list is a single literal string.

Because a function can return any number of results (see Section 4.4.3), the number of results must be adjusted before they are used (see Section 4.3). If the function is called as a statement (see Section 4.4.5), then its return list is adjusted to 0, thus discarding all returned values. If the function is called in a place that needs a single value (syntactically denoted by the non-terminal exp1), then its return list is adjusted to 1, thus discarding all returned values but the first one. If the function is called in a place that can hold many values (syntactically denoted by the non-terminal exp), then no adjustment is made. The only places that can hold many values is the last (or the only) expression in an assignment, in an argument list, or in the return statement. Here are some examples:

       f()                -- adjusted to 0 results
       g(f(), x)          -- f() is adjusted to 1 result
       g(x, f())          -- g gets x plus all values returned by f()
       a,b,c = f(), x     -- f() is adjusted to 1 result (and c gets nil)
       a,b,c = x, f()     -- f() is adjusted to 2
       a,b,c = f()        -- f() is adjusted to 3
       return f()         -- returns all values returned by f()
       return x,y,f()     -- returns a, b, and all values returned by f()

4.5.9 - Function Definitions

The syntax for function definition is

       function ::= function `(' [parlist1] `)' block end
       stat ::= function funcname `(' [parlist1] `)' block end
       funcname ::= name | name `.' name | name `:' name
The statement
       function f () ... end
is just syntactic sugar for
       f = function () ... end
and the statement
       function v.f () ... end
is syntactic sugar for
       v.f = function () ... end

A function definition is an executable expression, whose value has type function. When Lua pre-compiles a chunk, all its function bodies are pre-compiled too. Then, whenever Lua executes the function definition, its upvalues are fixed (see Section 4.6), and the function is instantiated (or closed). This function instance (or closure) is the final value of the expression. Different instances of the same function may have different upvalues.

Parameters act as local variables, initialized with the argument values:

       parlist1 ::= `...'
       parlist1 ::= name {`,' name} [`,' `...']
When a function is called, the list of arguments is adjusted to the length of the list of parameters (see Section 4.3), unless the function is a vararg function, which is indicated by three dots (`...') at the end of its parameter list. A vararg function does not adjust its argument list; instead, it collects all extra arguments into an implicit parameter, called arg. The value of arg is a table, with a field n whose value is the number of extra arguments, and the extra arguments at positions 1, 2, ..., n.

As an example, consider the following definitions:

       function f(a, b) end
       function g(a, b, ...) end
       function r() return 1,2,3 end
Then, we have the following mapping from arguments to parameters:
       CALL            PARAMETERS

f(3) a=3, b=nil f(3, 4) a=3, b=4 f(3, 4, 5) a=3, b=4 f(r(), 10) a=1, b=10 f(r()) a=1, b=2

g(3) a=3, b=nil, arg={n=0} g(3, 4) a=3, b=4, arg={n=0} g(3, 4, 5, 8) a=3, b=4, arg={5, 8; n=2} g(5, r()) a=5, b=1, arg={2, 3; n=2}

Results are returned using the return statement (see Section 4.4.3). If control reaches the end of a function without encountering a return statement, then the function returns with no results.

The syntax

       funcname ::= name `:' name
is used for defining methods, that is, functions that have an implicit extra parameter self.

The statement

       function v:f (...) ... end
is just syntactic sugar for
       v.f = function (self, ...) ... end
Note that the function gets an extra formal parameter called self.

4.6 - Visibility and Upvalues

A function body may refer to its own local variables (which include its parameters) and to global variables, as long as they are not shadowed by local variables with the same name from enclosing functions. A function cannot access a local variable from an enclosing function, since such variables may no longer exist when the function is called. However, a function may access the value of a local variable from an enclosing function, using upvalues, whose syntax is

       upvalue ::= `%' name

An upvalue is somewhat similar to a variable expression, but whose value is frozen when the function wherein it appears is instantiated. The name used in an upvalue may be the name of any variable visible at the point where the function is defined, that is, global variables and local variables from the immediately enclosing function. Note that when the upvalue is a table, only the reference to that table (which is the value of the upvalue) is frozen; the table contents can be changed at will. Using table values as upvalues is a technique for having writable but private state attached to functions.

Here are some examples:

       a,b,c = 1,2,3   -- global variables
       local d
       function f (x)
         local b = {}  -- x and b are local to f; b shadows the global b
         local g = function (a)
           local y     -- a and y are local to g
           p = a       -- OK, access local `a'
           p = c       -- OK, access global `c'
           p = b       -- ERROR: cannot access a variable in outer scope
           p = %b      -- OK, access frozen value of `b' (local to `f')
           %b = 3      -- ERROR: cannot change an upvalue
           %b.x = 3    -- OK, change the table contents
           p = %c      -- OK, access frozen value of global `c'
           p = %y      -- ERROR: `y' is not visible where `g' is defined
           p = %d      -- ERROR: `d' is not visible where `g' is defined
         end           -- g
       end             -- f

4.7 - Error Handling

Because Lua is an extension language, all Lua actions start from C code in the host program calling a function from the Lua library. Whenever an error occurs during Lua compilation or execution, the function _ERRORMESSAGE is called (provided it is different from nil), and then the corresponding function from the library (lua_dofile, lua_dostring, lua_dobuffer, or lua_call) is terminated, returning an error condition.

Memory allocation errors are an exception to the previous rule. When memory allocation fails, Lua may not be able to execute the _ERRORMESSAGE function. So, for this kind of error, Lua does not call the _ERRORMESSAGE function; instead, the corresponding function from the library returns immediately with a special error code (LUA_ERRMEM). This and other error codes are defined in lua.h; Section 5.8.

The only argument to _ERRORMESSAGE is a string describing the error. The default definition for this function calls _ALERT, which prints the message to stderr (see Section 6.1). The standard I/O library redefines _ERRORMESSAGE and uses the debug facilities (see Section 7) to print some extra information, such as a call stack traceback.

Lua code can explicitly generate an error by calling the function error (see Section 6.1). Lua code can ``catch'' an error using the function call (see Section 6.1).

4.8 - Tag Methods

Lua provides a powerful mechanism to extend its semantics, called tag methods. A tag method is a programmer-defined function that is called at specific key points during the execution of a Lua program, allowing the programmer to change the standard Lua behavior at these points. Each of these points is called an event.

The tag method called for any specific event is selected according to the tag of the values involved in the event (see Section 3). The function settagmethod changes the tag method associated with a given pair (tag, event). Its first parameter is the tag, the second parameter is the event name (a string; see below), and the third parameter is the new method (a function), or nil to restore the default behavior for the pair. The settagmethod function returns the previous tag method for that pair. A companion function gettagmethod receives a tag and an event name and returns the current method associated with the pair.

Tag methods are called in the following events, identified by the given names. The semantics of tag methods is better explained by a Lua function describing the behavior of the interpreter at each event. This function not only shows when a tag method is called, but also its arguments, its results, and the default behavior. The code shown here is only illustrative; the real behavior is hard coded in the interpreter, and it is much more efficient than this simulation. All functions used in these descriptions (rawget, tonumber, call, etc.) are described in Section 6.1.

``add'':
called when a + operation is applied to non-numerical operands.

The function getbinmethod below defines how Lua chooses a tag method for a binary operation. First, Lua tries the first operand. If its tag does not define a tag method for the operation, then Lua tries the second operand. If it also fails, then it gets a tag method from tag 0.

       function getbinmethod (op1, op2, event)
         return gettagmethod(tag(op1), event) or
                gettagmethod(tag(op2), event) or
                gettagmethod(0, event)
       end
Using this function, the tag method for the ``add'' event is
       function add_event (op1, op2)
         local o1, o2 = tonumber(op1), tonumber(op2)
         if o1 and o2 then  -- both operands are numeric
           return o1+o2  -- '+' here is the primitive 'add'
         else  -- at least one of the operands is not numeric
           local tm = getbinmethod(op1, op2, "add")
           if tm then
             -- call the method with both operands and an extra
             -- argument with the event name
             return tm(op1, op2, "add")
           else  -- no tag method available: default behavior
             error("unexpected type at arithmetic operation")
           end
         end
       end

``sub'':
called when a - operation is applied to non-numerical operands. Behavior similar to the ``add'' event.

``mul'':
called when a * operation is applied to non-numerical operands. Behavior similar to the ``add'' event.

``div'':
called when a / operation is applied to non-numerical operands. Behavior similar to the ``add'' event.

``pow'':
called when a ^ operation (exponentiation) is applied, even for numerical operands.
       function pow_event (op1, op2)
         local tm = getbinmethod(op1, op2, "pow")
         if tm then
           -- call the method with both operands and an extra
           -- argument with the event name
           return tm(op1, op2, "pow")
         else  -- no tag method available: default behavior
           error("unexpected type at arithmetic operation")
         end
       end

``unm'':
called when a unary - operation is applied to a non-numerical operand.
       function unm_event (op)
         local o = tonumber(op)
         if o then  -- operand is numeric
           return -o  -- '-' here is the primitive 'unm'
         else  -- the operand is not numeric.
           -- Try to get a tag method from the operand;
           --  if it does not have one, try a "global" one (tag 0)
           local tm = gettagmethod(tag(op), "unm") or
                      gettagmethod(0, "unm")
           if tm then
             -- call the method with the operand, nil, and an extra
             -- argument with the event name
             return tm(op, nil, "unm")
           else  -- no tag method available: default behavior
             error("unexpected type at arithmetic operation")
           end
         end
       end

``lt'':
called when an order operation is applied to non-numerical or non-string operands. It corresponds to the < operator.
       function lt_event (op1, op2)
         if type(op1) == "number" and type(op2) == "number" then
           return op1 < op2   -- numeric comparison
         elseif type(op1) == "string" and type(op2) == "string" then
           return op1 < op2   -- lexicographic comparison
         else
           local tm = getbinmethod(op1, op2, "lt")
           if tm then
             return tm(op1, op2, "lt")
           else
             error("unexpected type at comparison");
           end
         end
       end
The other order operators use this tag method according to the usual equivalences:
       a>b    <=>  b<a
       a<=b   <=>  not (b<a)
       a>=b   <=>  not (a<b)

``concat'':
called when a concatenation is applied to non-string operands.
       function concat_event (op1, op2)
         if (type(op1) == "string" or type(op1) == "number") and
            (type(op2) == "string" or type(op2) == "number") then
           return op1..op2  -- primitive string concatenation
         else
           local tm = getbinmethod(op1, op2, "concat")
           if tm then
             return tm(op1, op2, "concat")
           else
             error("unexpected type for concatenation")
           end
         end
       end

``index'':
called when Lua tries to retrieve the value of an index not present in a table. See the ``gettable'' event for its semantics.

``getglobal'':
called whenever Lua needs the value of a global variable. This method can only be set for nil and for tags created by newtag. Note that the tag is that of the current value of the global variable.
       function getglobal (varname)
         -- access the table of globals
         local value = rawget(globals(), varname)
         local tm = gettagmethod(tag(value), "getglobal")
         if not tm then
           return value
         else
           return tm(varname, value)
         end
       end
The function getglobal is defined in the basic library (see Section 6.1).

``setglobal'':
called whenever Lua assigns to a global variable. This method cannot be set for numbers, strings, and tables and userdata with the default tag.
       function setglobal (varname, newvalue)
         local oldvalue = rawget(globals(), varname)
         local tm = gettagmethod(tag(oldvalue), "setglobal")
         if not tm then
           rawset(globals(), varname, newvalue)
         else
           tm(varname, oldvalue, newvalue)
         end
       end
The function setglobal is defined in the basic library (see Section 6.1).

``gettable'':
called whenever Lua accesses an indexed variable. This method cannot be set for tables with the default tag.
       function gettable_event (table, index)
         local tm = gettagmethod(tag(table), "gettable")
         if tm then
           return tm(table, index)
         elseif type(table) ~= "table" then
           error("indexed expression not a table");
         else
           local v = rawget(table, index)
           tm = gettagmethod(tag(table), "index")
           if v == nil and tm then
             return tm(table, index)
           else
             return v
           end
         end
       end

``settable'':
called when Lua assigns to an indexed variable. This method cannot be set for tables with the default tag.
       function settable_event (table, index, value)
         local tm = gettagmethod(tag(table), "settable")
         if tm then
           tm(table, index, value)
         elseif type(table) ~= "table" then
           error("indexed expression not a table")
         else
           rawset(table, index, value)
         end
       end

``function'':
called when Lua tries to call a non-function value.
       function function_event (func, ...)
         if type(func) == "function" then
           return call(func, arg)
         else
           local tm = gettagmethod(tag(func), "function")
           if tm then
             for i=arg.n,1,-1 do
               arg[i+1] = arg[i]
             end
             arg.n = arg.n+1
             arg[1] = func
             return call(tm, arg)
           else
             error("call expression not a function")
           end
         end
       end

``gc'':
called when Lua is ``garbage collecting'' a userdata. This tag method can be set only from C, and cannot be set for a userdata with the default tag. For each userdata to be collected, Lua does the equivalent of the following function:
       function gc_event (obj)
         local tm = gettagmethod(tag(obj), "gc")
         if tm then
           tm(obj)
         end
       end
In a garbage-collection cycle, the tag methods for userdata are called in reverse order of tag creation, that is, the first tag methods to be called are those associated with the last tag created in the program. Moreover, at the end of the cycle, Lua does the equivalent of the call gc_event(nil).


5 - The Application Program Interface

This section describes the API for Lua, that is, the set of C functions available to the host program to communicate with Lua. All API functions and related types and constants are declared in the header file lua.h.

Even when we use the term ``function'', any facility in the API may be provided as a macro instead. All such macros use each of its arguments exactly once, and so do not generate hidden side-effects.

5.1 - States

The Lua library is fully reentrant: it does not have any global variables. The whole state of the Lua interpreter (global variables, stack, tag methods, etc.) is stored in a dynamically allocated structure of type lua_State; this state must be passed as the first argument to every function in the library (except lua_open below).

Before calling any API function, you must create a state by calling

       lua_State *lua_open (int stacksize);
The sole argument to this function is the stack size for the interpreter. (Each function call needs one stack position for each argument, local variable, and temporary value, plus one position for book-keeping. The stack must also have some 20 extra positions available. For very small implementations, without recursive functions, a stack size of 100 should be enough.) If stacksize is zero, then a default size of 1024 is used.

To release a state created with lua_open, call

       void lua_close (lua_State *L);
This function destroys all objects in the given Lua environment (calling the corresponding garbage-collection tag methods, if any) and frees all dynamic memory used by that state. Usually, you do not need to call this function, because all resources are naturally released when your program ends. On the other hand, long-running programs - like a daemon or a web server - might need to release states as soon as they are not needed, to avoid growing too big.

With the exception of lua_open, all functions in the Lua API need a state as their first argument.

5.2 - The Stack and Indices

Lua uses a stack to pass values to and from C. Each element in this stack represents a Lua value (nil, number, string, etc.).

For convenience, most query operations in the API do not follow a strict stack discipline. Instead, they can refer to any element in the stack by using an index: A positive index represents an absolute stack position (starting at 1, not 0 as in C); a negative index represents an offset from the top of the stack. More specifically, if the stack has n elements, index 1 represents the first element (that is, the first element pushed onto the stack), and index n represents the last element; index -1 also represents the last element (that is, the element at the top), and index -n represents the first element. We say that an index is valid if it lays between 1 and the stack top (that is, if 1 <= abs(index) <= top).

At any time, you can get the index of the top element by calling

       int lua_gettop (lua_State *L);
Because indices start at 1, the result of lua_gettop is equal to the number of elements in the stack (and so 0 means an empty stack).

When you interact with Lua API, you are responsible for controlling stack overflow. The function

       int lua_stackspace (lua_State *L);
returns the number of stack positions still available. Whenever Lua calls C, it ensures that at least LUA_MINSTACK positions are still available. LUA_MINSTACK is defined in lua.h and is at least 16, and so you have to worry about stack space only when your code has loops pushing elements onto the stack.

Most query functions accept as indices any value inside the available stack space. Such indices are called acceptable indices. More formally, we can define an acceptable index as

     (index < 0 && abs(index) <= top) || (index > 0 && index <= top + stackspace)
Note that 0 is not an acceptable index.

5.3 - Stack Manipulation

The API offers the following functions for basic stack manipulation:
       void lua_settop    (lua_State *L, int index);
       void lua_pushvalue (lua_State *L, int index);
       void lua_remove    (lua_State *L, int index);
       void lua_insert    (lua_State *L, int index);

lua_settop accepts any acceptable index, or 0, and sets the stack top to that index. If the new top is larger than the old one, then the new elements are filled with nil. If index is 0, then all stack elements are removed. A useful macro defined in the API is

       #define lua_pop(L,n) lua_settop(L, -(n)-1)
which pops n elements from the stack.

lua_pushvalue pushes onto the stack a copy of the element at the given index. lua_remove removes the element at the given position, shifting down the elements on top of that position to fill in the gap. lua_insert moves the top element into the given position, shifting up the elements on top of that position to open space. These functions accept only valid indices. As an example, if the stack starts as 10 20 30 40 50 (from bottom to top), then

       lua_pushvalue(L, 3)    --> 10 20 30 40 50 30
       lua_pushvalue(L, -1)   --> 10 20 30 40 50 30 30
       lua_remove(L, -3)      --> 10 20 30 40 30 30
       lua_remove(L,  6)      --> 10 20 30 40 30
       lua_insert(L,  1)      --> 30 10 20 30 40
       lua_insert(L, -1)      --> 30 10 20 30 40  (no effect)
       lua_settop(L, -3)      --> 30 10 20
       lua_settop(L, 6)       --> 30 10 20 nil nil nil

5.4 - Querying the Stack

To check the type of a stack element, the following functions are available:

       int         lua_type        (lua_State *L, int index);
       int         lua_tag         (lua_State *L, int index);
       int         lua_isnil       (lua_State *L, int index);
       int         lua_isnumber    (lua_State *L, int index);
       int         lua_isstring    (lua_State *L, int index);
       int         lua_istable     (lua_State *L, int index);
       int         lua_isfunction  (lua_State *L, int index);
       int         lua_iscfunction (lua_State *L, int index);
       int         lua_isuserdata  (lua_State *L, int index);
These functions can be called with any acceptable index.

lua_type returns one of the following constants, according to the type of the given object: LUA_TNIL, LUA_TNUMBER, LUA_TSTRING, LUA_TTABLE, LUA_TFUNCTION, LUA_TUSERDATA. If the index is non-valid (that is, if that stack position is ``empty''), then lua_type returns LUA_TNONE. These constants can be converted to strings with

       const char *lua_typename (lua_State *L, int t);
where t is a type returned by lua_type. The strings returned by lua_typename are "nil", "number", "string", "table", "function", "userdata", and "no value",

lua_tag returns the tag of a value, or LUA_NOTAG for a non-valid index.

The lua_is* functions return 1 if the object is compatible with the given type, and 0 otherwise. They always return 0 for a non-valid index. lua_isnumber accepts numbers and numerical strings, lua_isstring accepts strings and numbers (see Section 4.2), and lua_isfunction accepts both Lua functions and C functions. To distinguish between Lua functions and C functions, you should use lua_iscfunction. To distinguish between numbers and numerical strings, you can use lua_type.

The API also has functions to compare two values in the stack:

       int lua_equal    (lua_State *L, int index1, int index2);
       int lua_lessthan (lua_State *L, int index1, int index2);
These functions are equivalent to their counterparts in Lua. Specifically, lua_lessthan is equivalent to the lt_event described in Section 4.8. Both functions return 0 if any of the indices are non-valid.

To translate a value in the stack to a specific C type, you can use the following conversion functions:

       double         lua_tonumber    (lua_State *L, int index);
       const char    *lua_tostring    (lua_State *L, int index);
       size_t         lua_strlen      (lua_State *L, int index);
       lua_CFunction  lua_tocfunction (lua_State *L, int index);
       void          *lua_touserdata  (lua_State *L, int index);
These functions can be called with any acceptable index. When called with a non-valid index, they act as if the given value had an incorrect type.

lua_tonumber converts the value at the given index to a floating-point number. This value must be a number or a string convertible to number (see Section 4.2); otherwise, lua_tonumber returns 0.

lua_tostring converts a Lua value to a string (const char*). This value must be a string or a number; otherwise, the function returns NULL. This function returns a pointer to a string inside the Lua environment. Those strings always have a zero ('\0') after their last character (as in C), but may contain other zeros in their body. If you do not know whether a string may contain zeros, you should use lua_strlen to get its actual length. Because Lua has garbage collection, there is no guarantee that the pointer returned by lua_tostring will be valid after the respective value is removed from the stack.

lua_tocfunction converts a value in the stack to a C function. This value must be a C function; otherwise, lua_tocfunction returns NULL. The type lua_CFunction is explained in Section 5.13.

lua_touserdata converts a value to void*. This value must have type userdata; otherwise, lua_touserdata returns NULL.

5.5 - Pushing values onto the Stack

The API has the following functions to push C values onto the stack:

       void lua_pushnumber    (lua_State *L, double n);
       void lua_pushlstring   (lua_State *L, const char *s, size_t len);
       void lua_pushstring    (lua_State *L, const char *s);
       void lua_pushusertag   (lua_State *L, void *u, int tag);
       void lua_pushnil       (lua_State *L);
       void lua_pushcfunction (lua_State *L, lua_CFunction f);
These functions receive a C value, convert it to a corresponding Lua value, and push the result onto the stack. In particular, lua_pushlstring and lua_pushstring make an internal copy of the given string. lua_pushstring can only be used to push proper C strings (that is, strings that end with a zero and do not contain embedded zeros); otherwise you should use the more general lua_pushlstring, which accepts an explicit size.

5.6 - Garbage Collection

Lua uses two numbers to control its garbage collection. One number counts how many bytes of dynamic memory Lua is using, and the other is a threshold. (This internal byte counter kept by Lua is not completely acurate; it is just a lower bound, usually within 10% of the correct value.) When the number of bytes crosses the threshold, Lua runs a garbage-collection cycle, which reclaims the memory of all ``dead'' objects (that is, objects no longer accessible from Lua). The byte counter is corrected, and then the threshold is reset to twice the value of the byte counter.

You can access the current values of these two numbers through the following functions:

       int  lua_getgccount (lua_State *L);
       int  lua_getgcthreshold (lua_State *L);
Both return their respective values in Kbytes. You can change the threshold value with
       void  lua_setgcthreshold (lua_State *L, int newthreshold);
Again, the newthreshold value is given in Kbytes. When you call this function, Lua sets the new threshold and checks it against the byte counter. If the new threshold is smaller than the byte counter, then Lua immediately runs the garbage collector; after the collection, a new threshold is set according to the previous rule.

If you want to change the adaptative behavior of the garbage collector, you can use the garbage-collection tag method for nil to set your own threshold (the tag method is called after Lua resets the threshold).

5.7 - Userdata and Tags

Because userdata are objects, the function lua_pushusertag may create a new userdata. If Lua has a userdata with the given value (void*) and tag, then that userdata is pushed. Otherwise, a new userdata is created, with the given value and tag. If this function is called with tag equal to LUA_ANYTAG, then Lua will try to find any userdata with the given value, regardless of its tag. If there is no userdata with that value, then a new one is created, with tag equal to 0.

Userdata can have different tags, whose semantics are only known to the host program. Tags are created with the function

       int lua_newtag (lua_State *L);
The function lua_settag changes the tag of the object on top of the stack (without popping it):
       void lua_settag (lua_State *L, int tag);
The object must be a userdata or a table; the given tag must be a value created with lua_newtag.

5.8 - Executing Lua Code

A host program can execute Lua chunks written in a file or in a string by using the following functions:
       int lua_dofile   (lua_State *L, const char *filename);
       int lua_dostring (lua_State *L, const char *string);
       int lua_dobuffer (lua_State *L, const char *buff,
                         size_t size, const char *name);
These functions return 0 in case of success, or one of the following error codes if they fail: These constants are defined in lua.h.

When called with argument NULL, lua_dofile executes the stdin stream. lua_dofile and lua_dobuffer are both able to execute pre-compiled chunks. They automatically detect whether the chunk is text or binary, and load it accordingly (see program luac). lua_dostring executes only source code, given in textual form.

The third parameter to lua_dobuffer is the ``name of the chunk'', which is used in error messages and debug information. If name is NULL, then Lua gives a default name to the chunk.

These functions push onto the stack any values eventually returned by the chunk. A chunk may return any number of values; Lua takes care that these values fit into the stack space, but after the call the responsibility is back to you. If you need to push other elements after calling any of these functions, and you want to ``play safe'', you must either check the stack space with lua_stackspace or remove the returned elements from the stack (if you do not need them). For instance, the following code loads a chunk in a file and discards all results returned by this chunk, leaving the stack as it was before the call:

      {
       int oldtop = lua_gettop(L);
       lua_dofile(L, filename);
       lua_settop(L, oldtop);
      }

5.9 - Manipulating Global Variables in Lua

To read the value of a global Lua variable, you call

       void lua_getglobal (lua_State *L, const char *varname);
which pushes onto the stack the value of the given variable. As in Lua, this function may trigger a tag method for the ``getglobal'' event (see Section 4.8). To read the real value of a global variable, without invoking any tag method, use lua_rawget over the table of globals (see below).

To store a value in a global variable, you call

       void lua_setglobal (lua_State *L, const char *varname);
which pops from the stack the value to be stored in the given variable. As in Lua, this function may trigger a tag method for the ``setglobal'' event (see Section 4.8). To set the real value of a global variable, without invoking any tag method, use lua_rawset over the table of globals (see below).

All global variables are kept in an ordinary Lua table. You can get this table calling

       void lua_getglobals (lua_State *L);
which pushes the current table of globals onto the stack. To set another table as the table of globals, you call
       void lua_setglobals (lua_State *L);
The table to be used is popped from the stack.

5.10 - Manipulating Tables in Lua

Lua tables can also be manipulated through the API.

To read the value of in a table, the table must reside somewhere in the stack. With this set, you call

       void lua_gettable (lua_State *L, int index);
where index refers to the table. lua_gettable pops a key from the stack, and returns (on the stack) the contents of the table at that key. As in Lua, this operation may trigger a tag method for the ``gettable'' event. To get the real value of any table key, without invoking any tag method, use the raw version:
       void lua_rawget (lua_State *L, int index);

To store a value into a table that resides somewhere in the stack, you push the key and the value onto the stack (in this order), and then call

       void lua_settable (lua_State *L, int index);
where index refers to the table. lua_settable pops from the stack both the key and the value. As in Lua, this operation may trigger a tag method for the ``settable'' event. To set the real value of any table index, without invoking any tag method, use the raw version:
       void lua_rawset (lua_State *L, int index);

Finally, the function

       void lua_newtable (lua_State *L);
creates a new, empty table and pushes it onto the stack.

5.11 - Using Tables as Arrays

The API has functions that help to use Lua tables as arrays, that is, tables indexed by numbers only:
       void lua_rawgeti (lua_State *L, int index, int n);
       void lua_rawseti (lua_State *L, int index, int n);
       int  lua_getn    (lua_State *L, int index);

lua_rawgeti gets the value of the n-th element of the table at stack position index.

lua_rawseti sets the value of the n-th element of the table at stack position index to the value at the top of the stack.

lua_getn returns the number of elements in the table at stack position index. This number is the value of the table field n, if it has a numeric value, or the largest numerical index with a non-nil value in the table.

5.12 - Calling Lua Functions

Functions defined in Lua (and C functions registered in Lua) can be called from the host program. This is done using the following protocol: First, the function to be called is pushed onto the stack; then, the arguments to the function are pushed (see Section 5.5) in direct order, that is, the first argument is pushed first. Finally, the function is called using

       int lua_call (lua_State *L, int nargs, int nresults);
This function returns the same error codes as lua_dostring and friends (see Section 5.8). If you want to propagate the error, instead of returning an error code, use
       void lua_rawcall (lua_State *L, int nargs, int nresults);

In both functions, nargs is the number of arguments that you pushed onto the stack. All arguments and the function value are popped from the stack, and the function results are pushed. The number of results are adjusted (see Section 4.3) to nresults, unless nresults is LUA_MULTRET. In that case, all results from the function are pushed. The function results are pushed in direct order (the first result is pushed first), so that after the call the last result is on the top.

The following example shows how the host program may do the equivalent to the Lua code:

       a,b = f("how", t.x, 4)
Here it is in C:
    lua_getglobal(L, "t");                      /* global `t' (for later use) */
    lua_getglobal(L, "f");                           /* function to be called */
    lua_pushstring(L, "how");                                 /* 1st argument */
    lua_pushstring(L, "x");                            /* push the string `x' */
    lua_gettable(L, -4);                      /* push result of t.x (2nd arg) */
    lua_pushnumber(L, 4);                                     /* 3rd argument */
    lua_call(L, 3, 2);        /* call function with 3 arguments and 2 results */
    lua_setglobal(L, "b");                         /* set global variable `b' */
    lua_setglobal(L, "a");                         /* set global variable `a' */
    lua_pop(L, 1);                               /* remove `t' from the stack */
Notice that the code above is ``balanced'': at its end ,the stack is back to its original configuration. This is considered good programming practice.

Some special Lua functions have their own C interfaces. The host program can generate a Lua error calling the function

       void lua_error (lua_State *L, const char *message);
This function never returns. If lua_error is called from a C function that has been called from Lua, then the corresponding Lua execution terminates, as if an error had occurred inside Lua code. Otherwise, the whole host program terminates with a call to exit(EXIT_FAILURE). Before terminating execution, the message is passed to the error handler function, _ERRORMESSAGE (see Section 4.7). If message is NULL, then _ERRORMESSAGE is not called.

Tag methods can be changed with

       void lua_settagmethod (lua_State *L, int tag, const char *event);
The second parameter is the tag, and the third is the event name (see Section 4.8); the new method is popped from the stack. To get the current value of a tag method, use the function
       void lua_gettagmethod (lua_State *L, int tag, const char *event);

It is also possible to copy all tag methods from one tag to another:

       int lua_copytagmethods (lua_State *L, int tagto, int tagfrom);
This function returns tagto.

You can traverse a table with the function

       int lua_next (lua_State *L, int index);
where index refers to the table to be traversed. The function pops a key from the stack, and pushes a key-value pair from the table (the ``next'' pair after the given key). If there are no more elements, then the function returns 0 (and pushes nothing). A typical traversal looks like this:
       /* table is in the stack at index `t' */
       lua_pushnil(L);  /* first key */
       while (lua_next(L, t) != 0) {
         /* `key' is at index -2 and `value' at index -1 */
         printf("%s - %s\n",
           lua_typename(L, lua_type(L, -2)), lua_typename(L, lua_type(L, -1)));
         lua_pop(L, 1);  /* removes `value'; keeps `index' for next iteration */
       }

The function

       void lua_concat (lua_State *L, int n);
concatenates the n values at the top of the stack, pops them, and leaves the result at the top; n must be at least 2. Concatenation is done following the usual semantics of Lua (see Section 4.5.5).

5.13 - Defining C Functions

To register a C function to Lua, there is the following convenience macro:
     #define lua_register(L, n, f) (lua_pushcfunction(L, f), lua_setglobal(L, n))
     /* const char *n;   */
     /* lua_CFunction f; */
which receives the name the function will have in Lua, and a pointer to the function. This pointer must have type lua_CFunction, which is defined as
       typedef int (*lua_CFunction) (lua_State *L);
that is, a pointer to a function with integer result and a single argument, a Lua environment.

In order to communicate properly with Lua, a C function must follow the following protocol, which defines the way parameters and results are passed: A C function receives its arguments from Lua in the stack, in direct order (the first argument is pushed first). To return values to Lua, a C function just pushes them onto the stack, in direct order (the first result is pushed first), and returns the number of results. Like a Lua function, a C function called by Lua can also return many results.

As an example, the following function receives a variable number of numerical arguments and returns their average and sum:

       static int foo (lua_State *L) {
         int n = lua_gettop(L);    /* number of arguments */
         double sum = 0;
         int i;
         for (i = 1; i <= n; i++) {
           if (!lua_isnumber(L, i))
             lua_error(L, "incorrect argument to function `average'");
           sum += lua_tonumber(L, i);
         }
         lua_pushnumber(L, sum/n);        /* first result */
         lua_pushnumber(L, sum);         /* second result */
         return 2;                   /* number of results */
       }
This function may be registered in Lua as `average' by calling
       lua_register(L, "average", foo);

When a C function is created, it is possible to associate some upvalues to it (see Section 4.6), thus creating a C closure; these values are passed to the function whenever it is called, as ordinary arguments. To associate upvalues to a C function, first these values should be pushed onto the stack. Then the function

       void lua_pushcclosure (lua_State *L, lua_CFunction fn, int n);
is used to push the C function onto the stack, with the argument n telling how many upvalues should be associated with the function (these upvalues are popped from the stack); in fact, the macro lua_pushcfunction is defined as lua_pushcclosure with n set to 0. Then, whenever the C function is called, these upvalues are inserted as the last arguments to the function, after the actual arguments provided in the call. This makes it easy to get the upvalues without knowing how many arguments the function received (recall that functions in Lua can receive any number of arguments): The i-th upvalue is in the stack at index i-(n+1), where n is the number of upvalues.

For more examples of C functions and closures, see files lbaselib.c, liolib.c, lmathlib.c, and lstrlib.c in the official Lua distribution.

5.14 - References to Lua Objects

If the C code needs to keep a Lua value outside the life span of a C function, then it must create a reference to the value. The functions to manipulate references are the following:

       int   lua_ref    (lua_State *L, int lock);
       int   lua_getref (lua_State *L, int ref);
       void  lua_unref  (lua_State *L, int ref);

lua_ref pops a value from the stack, creates a reference to it, and returns this reference. For a nil value, the reference is always LUA_REFNIL. (lua.h also defines a constant LUA_NOREF that is different from any valid reference.) If lock is not zero, then the object is locked: this means the object will not be garbage collected. Unlocked references may be garbage collected.

Whenever the referenced object is needed in C, a call to lua_getref pushes that object onto the stack; if the object has been collected, lua_getref returns 0 (and does not push anything).

When a reference is no longer needed, it should be released with a call to lua_unref.

Registry

When Lua starts, it registers a table at position LUA_REFREGISTRY. It can be accessed through the macro

  #define lua_getregistry(L)      lua_getref(L, LUA_REFREGISTRY)
This table can be used by C libraries as a general registry mechanism. Any C library can store data into this table, as long as it chooses a key different from other libraries.


6 - Standard Libraries

The standard libraries provide useful functions that are implemented directly through the standard API. Therefore, they are not necessary to the language, and are provided as separate C modules. Currently, Lua has the following standard libraries:

To have access to these libraries, the C host program must call the functions lua_baselibopen, lua_strlibopen, lua_mathlibopen, and lua_iolibopen, which are declared in lualib.h.

6.1 - Basic Functions

The basic library provides some core functions to Lua. Therefore, if you do not include this library in your application, you should check carefully whether you need to provide some alternative implementation for some facilities. (For instance, without function _ERRORMESSAGE, Lua is unable to show error messages.)

_ALERT (message)

Prints its only string argument to stderr. All error messages in Lua are printed through the function stored in the _ALERT global variable (see Section 4.7). Therefore, a program may assign another function to this variable to change the way such messages are shown (for instance, for systems without stderr).

assert (v [, message])

Issues an ``assertion failed!'' error when its argument v is nil. This function is equivalent to the following Lua function:
       function assert (v, m)
         if not v then
           m = m or ""
           error("assertion failed!  " .. m)
         end
       end

call (func, arg [, mode [, errhandler]])

Calls function func with the arguments given by the table arg. The call is equivalent to
       func(arg[1], arg[2], ..., arg[n])
where n is the result of getn(arg) (see Section 6.1). All results from func are simply returned by call.

By default, if an error occurs during the call to func, the error is propagated. If the string mode contains "x", then the call is protected. In this mode, function call does not propagate an error, regardless of what happens during the call. Instead, it returns nil to signal the error (besides calling the appropriated error handler).

If errhandler is provided, the error function _ERRORMESSAGE is temporarily set to errhandler, while func runs. In particular, if errhandler is nil, no error messages will be issued during the execution of the called function.

collectgarbage ([limit])

Sets the garbage-collection threshold for the given limit (in Kbytes), and checks it against the byte counter. If the new threshold is smaller than the byte counter, then Lua immediately runs the garbage collector (see Section 5.6). If limit is absent, it defaults to zero (thus forcing a garbage-collection cycle).

copytagmethods (tagto, tagfrom)

Copies all tag methods from one tag to another; returns tagto.

dofile (filename)

Receives a file name, opens the named file, and executes its contents as a Lua chunk, or as pre-compiled chunks. When called without arguments, dofile executes the contents of the standard input (stdin). If there is any error executing the file, then dofile returns nil. Otherwise, it returns the values returned by the chunk, or a non-nil value if the chunk returns no values. It issues an error when called with a non-string argument.

dostring (string [, chunkname])

Executes a given string as a Lua chunk. If there is any error executing the string, then dostring returns nil. Otherwise, it returns the values returned by the chunk, or a non-nil value if the chunk returns no values. The optional parameter chunkname is the ``name of the chunk'', used in error messages and debug information.

error (message)

Calls the error handler (see Section 4.7) and then terminates the last protected function called (in C: lua_dofile, lua_dostring, lua_dobuffer, or lua_callfunction; in Lua: dofile, dostring, or call in protected mode). If message is nil, then the error handler is not called. Function error never returns.

foreach (table, func)

Executes the given func over all elements of table. For each element, the function is called with the index and respective value as arguments. If the function returns any non-nil value, then the loop is broken, and this value is returned as the final value of foreach. This function could be defined in Lua:
       function foreach (t, f)
         for i, v in t do
           local res = f(i, v)
           if res then return res end
         end
       end

The behavior of foreach is undefined if you change the table t during the traversal.

foreachi (table, func)

Executes the given func over the numerical indices of table. For each index, the function is called with the index and respective value as arguments. Indices are visited in sequential order, from 1 to n, where n is the result of getn(table) (see Section 6.1). If the function returns any non-nil value, then the loop is broken, and this value is returned as the final value of foreachi. This function could be defined in Lua:
       function foreachi (t, f)
         for i=1,getn(t) do
           local res = f(i, t[i])
           if res then return res end
         end
       end

getglobal (name)

Gets the value of a global variable, or calls a tag method for ``getglobal''. Its full semantics is explained in Section 4.8. The string name does not need to be a syntactically valid variable name.

getn (table)

Returns the ``size'' of a table, when seen as a list. If the table has an n field with a numeric value, this value is the ``size'' of the table. Otherwise, the ``size'' is the largest numerical index with a non-nil value in the table. This function could be defined in Lua:
       function getn (t)
         if type(t.n) == "number" then return t.n end
         local max = 0
         for i, _ in t do
           if type(i) == "number" and i>max then max=i end
         end
         return max
       end

gettagmethod (tag, event)

Returns the current tag method for a given pair (tag, event). This function cannot be used to get a tag method for the ``gc'' event. (Such tag methods can only be manipulated by C code.)

globals ([table])

Returns the current table of globals. If the argument table is given, then it also sets this table as the table of globals.

newtag ()

Returns a new tag.

next (table, [index])

Allows a program to traverse all fields of a table. Its first argument is a table and its second argument is an index in this table. next returns the next index of the table and the value associated with the index. When called with nil as its second argument, next returns the first index of the table and its associated value. When called with the last index, or with nil in an empty table, next returns nil. If the second argument is absent, then it is interpreted as nil.

Lua has no declaration of fields; semantically, there is no difference between a field not present in a table or a field with value nil. Therefore, next only considers fields with non-nil values. The order in which the indices are enumerated is not specified, even for numeric indices (to traverse a table in numeric order, use a numerical for or the function foreachi).

The behavior of next is undefined if you change the table during the traversal.

print (e1, e2, ...)

Receives any number of arguments, and prints their values using the strings returned by tostring. This function is not intended for formatted output, but only as a quick way to show a value, for instance for debugging. See Section 6.4 for functions for formatted output.

rawget (table, index)

Gets the real value of table[index], without invoking any tag method. table must be a table, and index is any value different from nil.

rawset (table, index, value)

Sets the real value of table[index] to value, without invoking any tag method. table must be a table, index is any value different from nil, and value is any Lua value.

setglobal (name, value)

Sets the named global variable to the given value, or calls a tag method for ``setglobal''. Its full semantics is explained in Section 4.8. The string name does not need to be a syntactically valid variable name.

settag (t, tag)

Sets the tag of a given table (see Section 3). tag must be a value created with newtag (see Section 6.1). settag returns the value of its first argument (the table). For the safety of host programs, it is impossible to change the tag of a userdata from Lua.

settagmethod (tag, event, newmethod)

Sets a new tag method to the given pair (tag, event) and returns the old method. If newmethod is nil, then settagmethod restores the default behavior for the given event. This function cannot be used to set a tag method for the ``gc'' event. (Such tag methods can only be manipulated by C code.)

sort (table [, comp])

Sorts table elements in a given order, in-place, from table[1] to table[n], where n is the result of getn(table) (see Section 6.1). If comp is given, then it must be a function that receives two table elements, and returns true (that is, a value different from nil) when the first is less than the second (so that not comp(a[i+1], a[i]) will be true after the sort). If comp is not given, then the standard Lua operator < is used instead.

The sort algorithm is not stable (that is, elements considered equal by the given order may have their relative positions changed by the sort).

tag (v)

Allows Lua programs to test the tag of a value (see Section 3). It receives one argument, and returns its tag (a number).

tonumber (e [, base])

Tries to convert its argument to a number. If the argument is already a number or a string convertible to a number, then tonumber returns that number; otherwise, it returns nil.

An optional argument specifies the base to interpret the numeral. The base may be any integer between 2 and 36, inclusive. In bases above 10, the letter `A' (either upper or lower case) represents 10, `B' represents 11, and so forth, with `Z' representing 35. In base 10 (the default), the number may have a decimal part, as well as an optional exponent part (see Section 4.2). In other bases, only unsigned integers are accepted.

tostring (e)

Receives an argument of any type and converts it to a string in a reasonable format. For complete control of how numbers are converted, use function format.

tinsert (table [, pos] , value)

Inserts element value at table position pos, shifting other elements to open space, if necessary. The default value for pos is n+1, where n is the result of getn(table) (see Section 6.1), so that a call tinsert(t,x) inserts x at the end of table t. This function also sets or increments the field n of the table to n+1. This function is equivalent to the following Lua function, except that the table accesses are all raw (that is, without tag methods):

       function tinsert (t, ...)
         local pos, value
         local n = getn(t)
         if arg.n == 1 then
           pos, value = n+1, arg[1]
         else
           pos, value = arg[1], arg[2]
         end
         t.n = n+1;
         for i=n,pos,-1 do
           t[i+1] = t[i]
         end
         t[pos] = value
       end

tremove (table [, pos])

Removes from table the element at position pos, shifting other elements to close the space, if necessary. Returns the value of the removed element. The default value for pos is n, where n is the result of getn(table) (see Section 6.1), so that a call tremove(t) removes the last element of table t. This function also sets or decrements the field n of the table to n-1.

This function is equivalent to the following Lua function, except that the table accesses are all raw (that is, without tag methods):

       function tremove (t, pos)
         local n = getn(t)
         if n<=0 then return end
         pos = pos or n
         local value = t[pos]
         for i=pos,n-1 do
           t[i] = t[i+1]
         end
         t[n] = nil
         t.n = n-1
         return value
       end

type (v)

Allows Lua programs to test the type of a value. It receives one argument, and returns its type, coded as a string. The possible results of this function are "nil" (a string, not the value nil), "number", "string", "table", "function", and "userdata".

6.2 - String Manipulation

This library provides generic functions for string manipulation, such as finding and extracting substrings and pattern matching. When indexing a string in Lua, the first character is at position 1 (not at 0, as in C). Also, indices are allowed to be negative and are intepreted as indexing backwards, from the end of the string. Thus, the last character is at position -1, and so on.

strbyte (s [, i])

Returns the internal numerical code of the i-th character of s. If i is absent, then it is assumed to be 1. i may be negative.

Numerical codes are not necessarily portable across platforms.

strchar (i1, i2, ...)

Receives 0 or more integers. Returns a string with length equal to the number of arguments, wherein each character has the internal numerical code equal to its correspondent argument.

Numerical codes are not necessarily portable across platforms.

strfind (s, pattern [, init [, plain]])

Looks for the first match of pattern in s. If it finds one, then strfind returns the indices of s where this occurrence starts and ends; otherwise, it returns nil. If the pattern specifies captures (see gsub below), the captured strings are returned as extra results. A third, optional numerical argument init specifies where to start the search; its default value is 1, and may be negative. A value of 1 as a fourth, optional argument plain turns off the pattern matching facilities, so the function does a plain ``find substring'' operation, with no characters in pattern being considered ``magic''. Note that if plain is given, then init must be given too.

strlen (s)

Receives a string and returns its length. The empty string "" has length 0. Embedded zeros are counted, and so "a\000b\000c" has length 5.

strlower (s)

Receives a string and returns a copy of that string with all upper case letters changed to lower case. All other characters are left unchanged. The definition of what is an upper-case letter depends on the current locale.

strrep (s, n)

Returns a string that is the concatenation of n copies of the string s.

strsub (s, i [, j])

Returns another string, which is a substring of s, starting at i and running until j; i and j may be negative, If j is absent, then it is assumed to be equal to -1 (which is the same as the string length). In particular, the call strsub(s,1,j) returns a prefix of s with length j, and the call strsub(s, -i) returns a suffix of s with length i.

strupper (s)

Receives a string and returns a copy of that string with all lower case letters changed to upper case. All other characters are left unchanged. The definition of what is a lower case letter depends on the current locale.

format (formatstring, e1, e2, ...)

Returns a formatted version of its variable number of arguments following the description given in its first argument (which must be a string). The format string follows the same rules as the printf family of standard C functions. The only differences are that the options/modifiers *, l, L, n, p, and h are not supported, and there is an extra option, q. The q option formats a string in a form suitable to be safely read back by the Lua interpreter: The string is written between double quotes, and all double quotes, returns, and backslashes in the string are correctly escaped when written. For instance, the call
       format('%q', 'a string with "quotes" and \n new line')
will produce the string:
"a string with \"quotes\" and \
 new line"

Conversions can be applied to the n-th argument in the argument list, rather than the next unused argument. In this case, the conversion character % is replaced by the sequence %d$, where d is a decimal digit in the range [1,9], giving the position of the argument in the argument list. For instance, the call format("%2$d -> %1$03d", 1, 34) will result in "34 -> 001". The same argument can be used in more than one conversion.

The options c, d, E, e, f, g, G, i, o, u, X, and x all expect a number as argument, whereas q and s expect a string. The * modifier can be simulated by building the appropriate format string. For example, "%*g" can be simulated with "%"..width.."g".

Neither the format string nor the string values to be formatted with %s can contain embedded zeros. %q handles string values with embedded zeros.

gsub (s, pat, repl [, n])

Returns a copy of s in which all occurrences of the pattern pat have been replaced by a replacement string specified by repl. gsub also returns, as a second value, the total number of substitutions made.

If repl is a string, then its value is used for replacement. Any sequence in repl of the form %n with n between 1 and 9 stands for the value of the n-th captured substring.

If repl is a function, then this function is called every time a match occurs, with all captured substrings passed as arguments, in order (see below). If the value returned by this function is a string, then it is used as the replacement string; otherwise, the replacement string is the empty string.

The last, optional parameter n limits the maximum number of substitutions to occur. For instance, when n is 1 only the first occurrence of pat is replaced.

Here are some examples:

   x = gsub("hello world", "(%w+)", "%1 %1")
   --> x="hello hello world world"

x = gsub("hello world", "(%w+)", "%1 %1", 1) --> x="hello hello world"

x = gsub("hello world from Lua", "(%w+)%s*(%w+)", "%2 %1") --> x="world hello Lua from"

x = gsub("home = $HOME, user = $USER", "%$(%w+)", getenv) --> x="home = /home/roberto, user = roberto" (for instance)

x = gsub("4+5 = $return 4+5$", "%$(.-)%$", dostring) --> x="4+5 = 9"

local t = {name="lua", version="4.0"} x = gsub("$name - $version", "%$(%w+)", function (v) return %t[v] end) --> x="lua - 4.0"

t = {n=0} gsub("first second word", "(%w+)", function (w) tinsert(%t, w) end) --> t={"first", "second", "word"; n=3}

Patterns

Character Class:

a character class is used to represent a set of characters. The following combinations are allowed in describing a character class:
x
(where x is any magic characters ^$()%.[]*+-?) - represents the character x itself.
.
- (a dot) represents all characters.
%a
- represents all letters.
%c
- represents all control characters.
%d
- represents all digits.
%l
- represents all lower case letters.
%p
- represents all punctuation characters.
%s
- represents all space characters.
%u
- represents all upper case letters.
%w
- represents all alphanumeric characters.
%x
- represents all hexadecimal digits.
%z
- represents the character with representation 0.
%x
(where x is any non-alphanumeric character) - represents the character x. This is the standard way to escape the magic characters. We recommend that any punctuation character (even the non magic) should be preceded by a % when used to represent itself in a pattern.

[char-set]
- represents the class which is the union of all characters in char-set. A range of characters may be specified by separating the end characters of the range with a -. All classes %x described above may also be used as components in a char-set. All other characters in char-set represent themselves. For example, [%w_] (or [_%w]) represents all alphanumeric characters plus the underscore, [0-7] represents the octal digits, and [0-7%l%-] represents the octal digits plus the lower case letters plus the - character.

The interaction between ranges and classes is not defined. Therefore, patterns like [%a-z] or [a-%%] have no meaning.

[^char-set]
- represents the complement of char-set, where char-set is interpreted as above.
For all classes represented by single letters (%a, %c, ...), the corresponding upper-case letter represents the complement of the class. For instance, %S represents all non-space characters.

The definitions of letter, space, etc. depend on the current locale. In particular, the class [a-z] may not be equivalent to %l. The second form should be preferred for portability.

Pattern Item:

a pattern item may be

Pattern:

a pattern is a sequence of pattern items. A ^ at the beginning of a pattern anchors the match at the beginning of the subject string. A $ at the end of a pattern anchors the match at the end of the subject string. At other positions, ^ and $ have no special meaning and represent themselves.

Captures:

A pattern may contain sub-patterns enclosed in parentheses, they describe captures. When a match succeeds, the sub-strings of the subject string that match captures are stored (captured) for future use. Captures are numbered according to their left parentheses. For instance, in the pattern "(a*(.)%w(%s*))", the part of the string matching "a*(.)%w(%s*)" is stored as the first capture (and therefore has number 1); the character matching . is captured with number 2, and the part matching %s* has number 3.

A pattern cannot contain embedded zeros. Use %z instead.

6.3 - Mathematical Functions

This library is an interface to some functions of the standard C math library. In addition, it registers a tag method for the binary operator ^ that returns x^y when applied to numbers x^y.

The library provides the following functions:

       abs  acos  asin  atan  atan2  ceil  cos  deg    exp    floor   log  log10
       max  min   mod   rad   sin    sqrt  tan  frexp  ldexp  random  randomseed
plus a global variable PI. Most of them are only interfaces to the homonymous functions in the C library, except that, for the trigonometric functions, all angles are expressed in degrees, not radians. The functions deg and rad can be used to convert between radians and degrees.

The function max returns the maximum value of its numeric arguments. Similarly, min computes the minimum. Both can be used with 1, 2, or more arguments.

The functions random and randomseed are interfaces to the simple random generator functions rand and srand, provided by ANSI C. (No guarantees can be given for their statistical properties.) The function random, when called without arguments, returns a pseudo-random real number in the range [0,1). When called with a number n, random returns a pseudo-random integer in the range [1,n]. When called with two arguments, l and u, random returns a pseudo-random integer in the range [l,u].

6.4 - I/O Facilities

All input and output operations in Lua are done, by default, over two file handles, one for reading and one for writing. These handles are stored in two Lua global variables, called _INPUT and _OUTPUT. The global variables _STDIN, _STDOUT, and _STDERR are initialized with file descriptors for stdin, stdout, and stderr. Initially, _INPUT=_STDIN and _OUTPUT=_STDOUT.

A file handle is a userdata containing the file stream (FILE*), and with a distinctive tag created by the I/O library.

Unless otherwise stated, all I/O functions return nil on failure and some value different from nil on success.

openfile (filename, mode)

This function opens a file, in the mode specified in the string mode. It returns a new file handle, or, in case of errors, nil plus a string describing the error. This function does not modify either _INPUT or _OUTPUT.

The mode string can be any of the following:

``r''
read mode;
``w''
write mode;
``a''
append mode;
``r+''
update mode, all previous data is preserved;
``w+''
update mode, all previous data is erased;
``a+''
append update mode, previous data is preserved, writing is only allowed at the end of file.
The mode string may also have a b at the end, which is needed in some systems to open the file in binary mode. This string is exactlty what is used in the standard C function fopen.

closefile (handle)

This function closes the given file. It does not modify either _INPUT or _OUTPUT.

readfrom (filename)

This function may be called in two ways. When called with a file name, it opens the named file, sets its handle as the value of _INPUT, and returns this value. It does not close the current input file. When called without parameters, it closes the _INPUT file, and restores stdin as the value of _INPUT. If this function fails, it returns nil, plus a string describing the error.

If filename starts with a |, then a piped input is opened, via function popen. Not all systems implement pipes. Moreover, the number of files that can be open at the same time is usually limited and depends on the system.

writeto (filename)

This function may be called in two ways. When called with a file name, it opens the named file, sets its handle as the value of _OUTPUT, and returns this value. It does not close the current output file. Note that, if the file already exists, then it will be completely erased with this operation. When called without parameters, this function closes the _OUTPUT file, and restores stdout as the value of _OUTPUT. If this function fails, it returns nil, plus a string describing the error.

If filename starts with a |, then a piped input is opened, via function popen. Not all systems implement pipes. Moreover, the number of files that can be open at the same time is usually limited and depends on the system.

appendto (filename)

Opens a file named filename and sets it as the value of _OUTPUT. Unlike the writeto operation, this function does not erase any previous contents of the file; instead, anything written to the file is appended to its end. If this function fails, it returns nil, plus a string describing the error.

remove (filename)

Deletes the file with the given name. If this function fails, it returns nil, plus a string describing the error.

rename (name1, name2)

Renames file named name1 to name2. If this function fails, it returns nil, plus a string describing the error.

flush ([filehandle])

Saves any written data to the given file. If filehandle is not specified, then flush flushes all open files. If this function fails, it returns nil, plus a string describing the error.

seek (filehandle [, whence] [, offset])

Sets and gets the file position, measured in bytes from the beginning of the file, to the position given by offset plus a base specified by the string whence, as follows:

``set''
base is position 0 (beginning of the file);
``cur''
base is current position;
``end''
base is end of file;
In case of success, function seek returns the final file position, measured in bytes from the beginning of the file. If the call fails, it returns nil, plus a string describing the error.

The default value for whence is "cur", and for offset is 0. Therefore, the call seek(file) returns the current file position, without changing it; the call seek(file, "set") sets the position to the beginning of the file (and returns 0); and the call seek(file, "end") sets the position to the end of the file, and returns its size.

tmpname ()

Returns a string with a file name that can safely be used for a temporary file. The file must be explicitly opened before its use and removed when no longer needed.

read ([filehandle,] format1, ...)

Reads file _INPUT, or filehandle if this argument is given, according to the given formats, which specify what to read. For each format, the function returns a string (or a number) with the characters read, or nil if it cannot read data with the specified format. When called without formats, it uses a default format that reads the next line (see below).

The available formats are

``*n''
reads a number; this is the only format that returns a number instead of a string.
``*l''
reads the next line (skipping the end of line), or nil on end of file. This is the default format.
``*a''
reads the whole file, starting at the current position. On end of file, it returns the empty string.
``*w''
reads the next word (maximal sequence of non--white-space characters), skipping spaces if necessary, or nil on end of file.
number
reads a string with up to that number of characters, or nil on end of file.

write ([filehandle, ] value1, ...)

Writes the value of each of its arguments to file _OUTPUT, or to filehandle if this argument is given. The arguments must be strings or numbers. To write other values, use tostring or format before write. If this function fails, it returns nil, plus a string describing the error.

6.5 - System Facilities

clock ()

Returns an approximation of the amount of CPU time used by the program, in seconds.

date ([format])

Returns a string containing date and time formatted according to the given string format, following the same rules of the ANSI C function strftime. When called without arguments, it returns a reasonable date and time representation that depends on the host system and on the current locale.

execute (command)

This function is equivalent to the C function system. It passes command to be executed by an operating system shell. It returns a status code, which is system-dependent.

exit ([code])

Calls the C function exit, with an optional code, to terminate the program. The default value for code is the success code.

getenv (varname)

Returns the value of the process environment variable varname, or nil if the variable is not defined.

setlocale (locale [, category])

This function is an interface to the ANSI C function setlocale. locale is a string specifying a locale; category is an optional string describing which category to change: "all", "collate", "ctype", "monetary", "numeric", or "time"; the default category is "all". The function returns the name of the new locale, or nil if the request cannot be honored.


7 - The Debug Interface

Lua has no built-in debugging facilities. Instead, it offers a special interface, by means of functions and hooks, which allows the construction of different kinds of debuggers, profilers, and other tools that need ``inside information'' from the interpreter. This interface is declared in luadebug.h.

7.1 - Stack and Function Information

The main function to get information about the interpreter stack is

       int lua_getstack (lua_State *L, int level, lua_Debug *ar);
It fills parts of a lua_Debug structure with an identification of the activation record of the function executing at a given level. Level 0 is the current running function, whereas level n+1 is the function that has called level n. Usually, lua_getstack returns 1; when called with a level greater than the stack depth, it returns 0.

The structure lua_Debug is used to carry different pieces of information about an active function:

      typedef struct lua_Debug {
        const char *event;     /* "call", "return" */
        int currentline;       /* (l) */
        const char *name;      /* (n) */
        const char *namewhat;  /* (n) global, tag method, local, field */
        int nups;              /* (u) number of upvalues */
        int linedefined;       /* (S) */
        const char *what;      /* (S) "Lua" function, "C" function, Lua "main" */
        const char *source;    /* (S) */
        char short_src[LUA_IDSIZE]; /* (S) */

/* private part */ ... } lua_Debug;

lua_getstack fills only the private part of this structure, for future use. To fill in the other fields of lua_Debug with useful information, call
       int lua_getinfo (lua_State *L, const char *what, lua_Debug *ar);
This function returns 0 on error (e.g., an invalid option in what). Each character in the string what selects some fields of ar to be filled, as indicated by the letter in parentheses in the definition of lua_Debug: `S' fills in the fields source, linedefined, and what; `l' fills in the field currentline, etc. Moreover, `f' pushes onto the stack the function that is running at the given level.

To get information about a function that is not active (that is, it is not in the stack), you push the function onto the stack, and start the what string with the character >. For instance, to know in which line a function f was defined, you can write

       lua_Debug ar;
       lua_getglobal(L, "f");
       lua_getinfo(L, ">S", &ar);
       printf("%d\n", ar.linedefined);
The fields of lua_Debug have the following meaning:

source
If the function was defined in a string, source is that string; if the function was defined in a file, source starts with a @ followed by the file name.

short_src
A ``printable'' version of source, to be used in error messages.

linedefined
the line number where the definition of the function starts.

what
the string "Lua" if this is a Lua function, "C" if this is a C function, or "main" if this is the main part of a chunk.

currentline
the current line where the given function is executing. When no line information is available, currentline is set to -1.

name
a reasonable name for the given function. Because functions in Lua are first class values, they do not have a fixed name: Some functions may be the value of many global variables, while others may be stored only in a table field. The lua_getinfo function checks whether the given function is a tag method or the value of a global variable. If the given function is a tag method, then name points to the event name. If the given function is the value of a global variable, then name points to the variable name. If the given function is neither a tag method nor a global variable, then name is set to NULL.

namewhat
Explains the previous field. If the function is a global variable, namewhat is "global"; if the function is a tag method, namewhat is "tag-method"; otherwise namewhat is "" (the empty string).

nups
Number of upvalues of a function.

7.2 - Manipulating Local Variables

For the manipulation of local variables, luadebug.h uses indices: The first parameter or local variable has index 1, and so on, until the last active local variable.

The following functions allow the manipulation of the local variables of a given activation record.

       const char *lua_getlocal (lua_State *L, const lua_Debug *ar, int n);
       const char *lua_setlocal (lua_State *L, const lua_Debug *ar, int n);
The parameter ar must be a valid activation record, filled by a previous call to lua_getstack or given as argument to a hook (see Section 7.3). Function lua_getlocal gets the index of a local variable (n), pushes its value onto the stack, and returns its name. For lua_setlocal, you push the new value onto the stack, and the function assigns that value to the variable and returns its name. Both functions return NULL on failure; that happens if the index is greater than the number of active local variables.

As an example, the following function lists the names of all local variables for a function at a given level of the stack:

       int listvars (lua_State *L, int level) {
         lua_Debug ar;
         int i = 1;
         const char *name;
         if (lua_getstack(L, level, &ar) == 0)
           return 0;  /* failure: no such level in the stack */
         while ((name = lua_getlocal(L, &ar, i++)) != NULL) {
           printf("%s\n", name);
           lua_pop(L, 1);  /* remove variable value */
         }
         return 1;
       }

7.3 - Hooks

The Lua interpreter offers two hooks for debugging purposes: a call hook and a line hook. Both have the same type,

       typedef void (*lua_Hook) (lua_State *L, lua_Debug *ar);
and you can set them with the following functions:
       lua_Hook lua_setcallhook (lua_State *L, lua_Hook func);
       lua_Hook lua_setlinehook (lua_State *L, lua_Hook func);
A hook is disabled when its value is NULL, which is the initial value of both hooks. The functions lua_setcallhook and lua_setlinehook set their corresponding hooks and return their previous values.

The call hook is called whenever the interpreter enters or leaves a function. The event field of ar has the strings "call" or "return". This ar can then be used in calls to lua_getinfo, lua_getlocal, and lua_setlocal to get more information about the function and to manipulate its local variables.

The line hook is called every time the interpreter changes the line of code it is executing. The event field of ar has the string "line", and the currentline field has the line number. Again, you can use this ar in other calls to the debug API.

While Lua is running a hook, it disables other calls to hooks. Therefore, if a hook calls Lua to execute a function or a chunk, this execution ocurrs without any calls to hooks.

7.4 - The Reflexive Debug Interface

The library ldblib provides the functionality of the debug interface to Lua programs. If you want to use this library, your host application must open it, by calling lua_dblibopen.

You should exert great care when using this library. The functions provided here should be used exclusively for debugging and similar tasks (e.g., profiling). Please resist the temptation to use them as a usual programming tool. They are slow and violate some (otherwise) secure aspects of the language (e.g., privacy of local variables). As a general rule, if your program does not need this library, do not open it.

getinfo (function, [what])

This function returns a table with information about a function. You can give the function directly, or you can give a number as the value of function, which means the function running at level function of the stack: Level 0 is the current function (getinfo itself); level 1 is the function that called getinfo; and so on. If function is a number larger than the number of active functions, then getinfo returns nil.

The returned table contains all the fields returned by lua_getinfo, with the string what describing what to get. The default for what is to get all information available.

For instance, the expression getinfo(1,"n").name returns the name of the current function, if a reasonable name can be found, and getinfo(print) returns a table with all available information about the print function.

getlocal (level, local)

This function returns the name and the value of the local variable with index local of the function at level level of the stack. (The first parameter or local variable has index 1, and so on, until the last active local variable.) The function returns nil if there is no local variable with the given index, and raises an error when called with a level out of range. (You can call getinfo to check whether the level is valid.)

setlocal (level, local, value)

This function assigns the value value to the local variable with index local of the function at level level of the stack. The function returns nil if there is no local variable with the given index, and raises an error when called with a level out of range.

setcallhook (hook)

Sets the function hook as the call hook; this hook will be called every time the interpreter starts and exits the execution of a function. The only argument to the call hook is the event name ("call" or "return"). You can call getinfo with level 2 to get more information about the function being called or returning (level 0 is the getinfo function, and level 1 is the hook function). When called without arguments, this function turns off call hooks. setcallhook returns the old hook.

setlinehook (hook)

Sets the function hook as the line hook; this hook will be called every time the interpreter changes the line of code it is executing. The only argument to the line hook is the line number the interpreter is about to execute. When called without arguments, this function turns off line hooks. setlinehook returns the old hook.


8 - Lua Stand-alone

Although Lua has been designed as an extension language, to be embedded in a host C program, it is frequently used as a stand-alone language. An interpreter for Lua as a stand-alone language, called simply lua, is provided with the standard distribution. This program can be called with any sequence of the following arguments:

-sNUM
sets the stack size to NUM (if present, this must be the first option);
-
executes stdin as a file;
-c
calls lua_close after running all arguments;
-e \rmstat
executes string stat;
-f filename
executes file filename with the remaining arguments in table arg;
-i
enters interactive mode with prompt;
-q
enters interactive mode without prompt;
-v
prints version information;
var=value
sets global var to string "value";
filename
executes file filename.
When called without arguments, lua behaves as lua -v -i when stdin is a terminal, and as lua - otherwise.

All arguments are handled in order, except -c. For instance, an invocation like

       $ lua -i a=test prog.lua
will first interact with the user until an EOF in stdin, then will set a to "test", and finally will run the file prog.lua. (Here, $ is the shell prompt. Your prompt may be different.)

When the option -f filename is used, all remaining arguments in the command line are passed to the Lua program filename in a table called arg. In this table, the field n gets the index of the last argument, and the field 0 gets "filename". For instance, in the call

       $ lua a.lua -f b.lua t1 t3
the interpreter first runs the file a.lua, then creates a table
       arg = {"t1", "t3";  n = 2, [0] = "b.lua"}
and finally runs the file b.lua. The stand-alone interpreter also provides a getargs function that can be used to access all command line arguments. For instance, if you call Lua with the line
       $ lua -c a b
then a call to getargs in a or b will return the table
       {[0] = "lua", [1] = "-c", [2] = "a", [3] = "b", n = 3}

In interactive mode, a multi-line statement can be written finishing intermediate lines with a backslash (`\'). If the global variable _PROMPT is defined as a string, then its value is used as the prompt. Therefore, the prompt can be changed directly on the command line:

       $ lua _PROMPT='myprompt> ' -i
or in any Lua programs by assigning to _PROMPT.

In Unix systems, Lua scripts can be made into executable programs by using chmod +x and the #! form, as in #!/usr/local/bin/lua, or #!/usr/local/bin/lua -f to get other arguments.


Acknowledgments

The authors would like to thank CENPES/PETROBRAS which, jointly with Tecgraf, used early versions of this system extensively and gave valuable comments. The authors would also like to thank Carlos Henrique Levy, who found the name of the game. Lua means ``moon'' in Portuguese.


Incompatibilities with Previous Versions

Lua 4.0 is a major revision of the language. We took a great care to avoid incompatibilities with the previous public versions of Lua, but some differences had to be introduced. Here is a list of all these incompatibilities.

Incompatibilities with version 3.2

Changes in the Language

Changes in the Libraries

Changes in the API


The Complete Syntax of Lua

chunk ::= {stat [`;']}

block ::= chunk

stat ::= varlist1 `=' explist1
| functioncall
| do block end
| while exp1 do block end
| repeat block until exp1
| if exp1 then block {elseif exp1 then block} [else block] end
| return [explist1]
| break
| for `name' `=' exp1 `,' exp1 [`,' exp1] do block end
| for `name' `,' `name' in exp1 do block end
| function funcname `(' [parlist1] `)' block end
| local declist [init]

funcname ::= `name' | `name' `.' `name' | `name' `:' `name'

varlist1 ::= var {`,' var}

var ::= `name' | varorfunc `[' exp1 `]' | varorfunc `.' `name'

varorfunc ::= var | functioncall

declist ::= `name' {`,' `name'}

init ::= `=' explist1

explist1 ::= {exp1 `,'} exp

exp1 ::= exp

exp ::= nil | `number' | `literal' | var | function | upvalue
| functioncall | tableconstructor | `(' exp `)' | exp binop exp | unop exp

functioncall ::= varorfunc args | varorfunc `:' `name' args

args ::= `(' [explist1] `)' | tableconstructor | `literal'

function ::= function `(' [parlist1] `)' block end

parlist1 ::= `...' | `name' {`,' `name'} [`,' `...']

upvalue ::= `%' `name'

tableconstructor ::= `{' fieldlist `}' fieldlist ::= lfieldlist | ffieldlist | lfieldlist `;' ffieldlist | ffieldlist `;' lfieldlist lfieldlist ::= [lfieldlist1] ffieldlist ::= [ffieldlist1] lfieldlist1 ::= exp {`,' exp} [`,'] ffieldlist1 ::= ffield {`,' ffield} [`,'] ffield ::= `[' exp `]' `=' exp | `name' `=' exp

binop ::= `+' | `-' | `*' | `/' | `\^{ ' | `..'
| `<' | `<=' | `>' | `>=' | `==' | `\ { '=}
| and | or}

unop ::= `-' | not


Last update: Mon Nov 27 13:16:34 EDT 2000